![t.c electronic g force t.c electronic g force](https://www.njuskalo.hr/image-w920x690/procesori-efekti-pedale-kontroleri/t-c-electronic-g-force-slika-56826764.jpg)
There are three possibilities: Disabled - Will cause the G-Force to ignore any incoming program change. Program change With this parameter you set up how the G-Force should respond to incoming program changes. Note: The G-Force’s Modifiers are configured separately, meaning that they may refer to other MIDI channels. changes on to change presets in the G-Force. This is the channel that you should transmit Prg. In the MIDI section you set up the parameters of the global MIDI in the G-Force, meaning program change, MIDI mapping etc.īasic Channel The basic MIDI channel of the G-Force. You may hear a small click from this relay when the input is being adjusted. Note: The input level of the G-Force automatically optimizes the signal to noise ratio via a small relay in the input section. In Level, Out Level, Digital In These are read-only parameters displaying the Input level (adjusted with the front panel controls), Output level (adjusted with the front panel controls), and the Digital input sample rate (shown only when you are using the digital input). Preserve their internal relationships by keeping the mix level of the effect. Since you killed all of the dry signal and are bypassing the effect there is no output. NOTE: When Killdry is active, the overall bypass key will work as a mute. This function is very useful when you are running the G-Force in a parallel setup.
![t.c electronic g force t.c electronic g force](https://media.sweetwater.com/api/i/ha-e5a8f29c7b29ad8c__hmac-720cbbb519811dbd862e737c2723c02acda1cee6/images/items/750/GForceArtist-large.jpg)
Killdry The Killdry function enables you to remove all dry (direct) signal in the G-Force. If you want to input two mono sources, you can select LR- sum, this will enable both left and right to be summed together If you are only using one input on the G-Force, you should select L-Only. The Input The G-Force can use the Left input only (mono), the sum of left and right input (LR-sum), or both left and right input (stereo). G-Force is limited to 44.1kHz sample rate at both Analog and Digital inputs. The Source With this parameter you can select between the Digital input of the G-Force, or the Analog input. To set up the Audio In/Out parameters, press the I/O Setup key and use the Arrow keys to select Audio. All settings of the I/O Setup are global, i.e. In the I/O Setup display, you can select between MIDI, Control and Audio using the Arrow keys.
![t.c electronic g force t.c electronic g force](https://medias.audiofanzine.com/images/normal/tc-electronic-g-force-749145.jpg)
The parameters in the I/O Setup contain setups of all the G-Force’s external connections: - MIDI, Pedal, Digital and Analog Audio.